Dual Platform Automatic Soldering Robot 5-Axis 110V Automatic Soldering Machine for Wire Harness Assembly

Dual Platform Automatic Soldering Robot Built for U.S. Wire Harness and Electronics Assembly

U.S. assembly plants are running into the same three walls: soldering operators are hard to hire, loaded labor cost keeps climbing, and buyers now require documented process control before they approve a new supplier. This dual-platform automatic soldering robot was configured around those exact requirements — 110V/60Hz input for North American facilities, a dual-station layout so the operator loads one fixture while the other solders, and an intelligent constant-temperature loop that holds the joint within ±2°C instead of drifting with the operator's rhythm.
Wherever your line is today, the machine is designed to be retrofitted into an existing bench layout: 1000 x 750 x 850mm footprint, 4-5 kg/cm² shop air, standard 0.6-1.5mm solder wire, and a teaching file capacity large enough to store every harness variant you build in a year.

Why U.S. Buyers Choose the Dual Platform Layout

• Labor coverage without labor drama: one operator supervises two soldering stations; the alternating mode removes the idle gap between load and solder cycles.
• Documented quality, not operator feel: intelligent constant temperature control with automatic over-temperature alarm and shutdown; ±0.02mm repeatability keeps joint position repeatable across shifts.
• Fast changeover for high-mix work: tool-free quick-change soldering tips convert the machine between fine-pitch connector work and large pad work in about three seconds.
• North American electrical compatibility: AC 110V/60Hz configuration, UL-recognized heating and control components, CE and RoHS compliance documentation supplied with the shipment.
• Maintenance that does not need an engineer: modular heating element, replaceable tips and standard PLC control — spare parts kept in stock for U.S. customers and shipped within 48 hours.

Manual Bench vs This Soldering Robot

Key Selling Points

1. Rapid heat-up with dual-station alternating operation. High-efficiency heating components bring the tip to set temperature in seconds, and the dual-station mode lets one side solder while the other is loaded — no waiting, no idle machine time, consistent cycle output for volume harness orders.
2. Intelligent constant temperature control. The PLC-driven loop monitors the joint temperature in real time, corrects drift automatically, and alarms plus stops the cycle if an abnormal temperature is detected. Fewer cold joints, fewer lifted pads, and a longer service life for the heating element itself.
3. Interchangeable soldering heads. Fine pointed tips handle micro-precision work on connectors, header pins and PCB terminals; flat tips cover large-area and shielding joints. Tips are replaced without tools, so switching between part numbers costs seconds rather than a changeover.
4. Built-in safety protection. Over-heat, over-current and short-circuit protection are standard. The shell uses high-temperature resistant and heat-insulating materials, which keeps the exterior surface safe for operators working beside the machine through a full shift.
5. U.S.-market configuration. 110V/60Hz power input, English HMI with optional Spanish, imperial and metric program display, and a documentation pack including wiring diagram, compliance certificates and a commissioning checklist.

Product Parameter

Compliance, Spare Parts and Support

• UL-recognized heating and control components, CE and RoHS compliance certificates issued with the machine.
• Warranty: 1 year on the complete unit, 3 years on guide rail, motor and control board.
• Spare parts stocking program for U.S. customers — consumable tips, heating elements and wire feeders shipped from stock within 48 hours.
• Commissioning support by video call, English operation manual and training video, plus remote program review for new part numbers.
• Fumigated plywood case packing; EXW, FOB, CIF, DDP door-to-door quotation available on request.

Our Services

FAQ

1. Who are we?
We are an automation equipment manufacturer based in Guangdong, China, established in 2015, with a 50-200 person team focused on soldering, spot welding, dispensing and screw driving machines.
2. Can the machine run on U.S. power?
Yes. This model is built to AC 110V/60Hz for the North American market. 220V/50Hz is available for other regions.
3. How do you guarantee quality?
A pre-production joint sample is approved before mass production, and every machine passes a full functional inspection with a soldering sample report before shipment.
4. What is the warranty and how is it handled?
1 year for the complete machine and 3 years for the main board, guide rail and motor. Spare parts for U.S. customers are dispatched from stock within 48 hours.
5. Can I order a sample unit?
Yes. Single-set sample orders are welcome so you can validate joint quality and cycle time on your own harness before scaling up.
6. What delivery terms and payment methods do you accept?
EXW, FOB, CIF, FCA, CPT and DDP; payment by T/T, L/C at sight, and PayPal for sample orders. Accepted currencies include USD, EUR and CNY.
7. Do you provide fixtures for my part?
Yes. Send the 2D drawing or a sample harness and we design and quote the fixture together with the machine.